Epoxy Doming Resins, Hard, Crystal Clear, 400 grams/set (710-108)

SKU: 710-108
Sign up to get notified when this product is back in stock

Availability: Out of stock

RM39.22

Details

Details

Complete Cure time: 16 to 24 Hours 

Color once dry: crystal clear

Hardness: Hard

Now you can buy a fantastic High quality NON-TOXIC Epoxy Doming Resin at an affordable price! Low odor, minimum air bubbles and produces absolutely beautiful results. Use to coat objects or to fill bezel cup settings. If you are looking to make fabulous Scrabble Tile pendants, or other coated jewelry and wish to have a more durable finish than water based glazes (like Diamond Glaze or 3D Crystal Lacquer), this is the product for you. Waterproof your images with this jewelry grade 2 part mix epoxy resin. Cures without extra equipment.


You will receive:

1) 1 unit 300 grams Bottle of Resins (Part A)

2) 1 unit 100 grams Bottle of Hardener (Part B)

Other supplies are sold separately as you may or may not use them.

 

INSTRUCTIONS

Preparing to use Epoxy Doming Resin

- Make sure to clean your work area and any surfaces to be domed. Remove any wax, oil, dirt or other foreign particles to prevent contamination of the product.


Method 1: Mixing Epoxy Doming Resin (A : B in Weight Ratio 3 : 1) - RECOMMENDED Method

- Epoxy requires a minimum mass of material for the chemical reaction to occur, ensuring that the material cures properly. We suggest to mix minimum 9 grams of resins (Part A) with 3 grams of hardener (Part B). 

- Pour 9 grams of Resins (Part A) to 3 grams of Hardener (Part B) into an empty plastic cup (with total reading of 12 grams).

- Make sure to mix the 2 part epoxy according to the weight ratio 3 : 1 (Part A : B)

- Stir the mixture slowly in clockwise direction using stick or mini spoon. This will minimize the possibility of air bubbles forming in the mixture.

- Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface.


Method 2: Mixing Epoxy Doming Resin (A : B in Volumetric Ratio 2.5 : 1)

example: 25ml A mix with 10ml B

Note: To use this volumetric measurement method, we suggest to add extra 5% hardener to compensate for reading error.


Using Epoxy Resin

- Using mini spoon or stick, slowly drip the mixture onto the surface to be domed. Allow the mixture to spread towards the surface's outside edges on its own. Continue to fill the area with the resin until it rises up on the sides, creating a domed appearance.

- Remove any air bubbles which may have formed during the application. Simply place the toothpick or needle on the bubble and draw it towards the surface.

- Once applied, please allow minimum 16 hours for the mixture to be cured at room temperature (25-30 Degree Celsius).

- As the product is curing, be sure to check on it periodically to make sure no air bubbles have formed in your design. Remove them in the same manner as mentioned above.

Additional Info

Additional Info

ItemCode (SKU) 710-108
Weight (approx. in grams) 420.0000
Brand * Monsterkraft
Color Family * No
Material * No
Measurement * No
Style or Shape * Other

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)